fbpx
Connect with us

Luxury Cars

Maserati’s New Trofeo Collection Have Been Given Ferrari Built V8 Engines

Published

on

Maserati has announced both the Ghibli and Quattroporte Trofeo models will be given sporty Trofeo upgrades and powered by Ferrari built V8 engines.
Maserati Trofeo Ghibli Levante & Quattroporte Trio
The new Maserati Trofeo Collection. Credit: Maserati

Beginning in 2018 with the sporty Levante Trofeo SUV, Maserati has now announced the Ghibli and Quattroporte will also receive a super-sports upgrade and be made available in Trofeo versions – the top of Maserati’s range.

Powered by a 580 horsepower 3.8 V8 Twin Turbo engine, both the Ghibli Trofeo and Quattroporte Trofeo have a top speed of 326 kilometers an hour and take the title of Maserati’s faster sedans ever. In contrast, the Levante Trofeo’s maximum speed is 302 km/h.

Maserati Ghibli Trofeo 2021 Side View
2021 Maserati Ghibli Trofeo will launch in red. Credit: Maserati
Maserati Ghibli Trofeo 2021 Side Right View
Maserati Ghibli Trofeo 2021 Interior

The engine, which is already in the Levante Trofeo, is built at the Ferrari plant at Maranello to Maserati’s specifications, and has been modified and developed to deliver equally impressive performances on the rear-engine sedans.

Although entirely new for Ghibli, the V8 engine has already been used in the past on Quattroporte GTS as the 530 hp version and today is available in the 580 hp V8 engine in the new Ghibli, Quattroporte and Levante Trofeo.

2021 Maserati Ferrari V8 engine
580hp V8 engine built in Maranello at the Ferrari plant. Credit: Maserati

The Ghibli Trofeo has also been given two extra air vents on the hood of the car while the lateral air vents are bordered in red with the distinctive Trofeo badge and features a new front grille finished in Black Piano.

2021 Maserati Quattroporte Trofeo Side View
The 2021 Maserati Quattroporte Trofeo sedan will launch in green. Credit: Maserati
2021 Maserati Quattroporte Trofeo Front Right View

The Trofeo details continue into the interior, with a new on-board panel that displays an exclusive interface at switch-on, and headrests that bear the Trofeo badge with the name in three-dimensional embroidery. Both Trofeo models also feature full-grain Pieno Fiore natural leather and carbon fiber inserts with the Italian flag embellished on the central pillar.

Like the Levante Trofeo, the new Ghibli and Quattroporte Trofeo incorporates the Integrated Vehicle Control (IVC) system, with a specific setup that guarantees enhanced driving dynamics and greater active safety.

2021 Maserati Levante Trofeo White Side Profile
2021 Maserati Levante Trofeo launching in white. Credit: Maserati

Both sedans feature a “Corsa” button that sets the car for an even sportier driving style. Also included is Launch Control, a function that first appeared on Levante Trofeo, to unleash all the engine’s power for the ultimate driving experience.

2021 Maserati Levante Trofeo White Rear View

For their official launch, the Quattroporte Trofeo model will be released in green, the Levante Trofeo in white and the Ghibli Trofeo in red to celebrate Maserati’s all-Italian heritage.

The new Ghibli and Quattroporte Trofeo will be built at the Avvocato Giovanni Agnelli Plant (AGAP) at Grugliasco (Turin), and Levante Trofeo at the Mirafiori (Turin) plant.

Advertisement
Comments

Luxury Cars

Five Unique McLaren Senna GTR LM’s Inspired by 24 Hours of Le Mans

Published

on

McLaren Special Operations has revealed five unique Senna GTR LM models inspired by the McLaren F1 GTR’s that ruled the 1995 24 Hours of Le Mans.
Five unique McLaren Senna GTR LM cars by MSO. Credit: McLaren Automotive
Five unique McLaren Senna GTR LM cars by MSO. Credit: McLaren Automotive

McLaren’s bespoke division, the McLaren Special Operations (MSO) have revealed five special customer commissioned McLaren Senna GTR LM models inspired by the five McLaren F1 GTR’s that took out 1st, 2nd, 4th, 5th, and 13th position at the 1995 24 Hours of Le Mans. An even more astounding feat considering this was the first year McLaren had ever raced at Le Mans, and it was only three years after the creation of the F1.

The McLaren Senna GTR LM "The Ueno Clinic Car". Credit: McLaren Automotive
The McLaren Senna GTR LM “The Ueno Clinic Car”. Credit: McLaren Automotive

“The incredible cars of the McLaren Senna GTR LM collection are an exceptionally fitting way to celebrate the 25th anniversary of our Le Mans victory in 1995,’” commented Mike Flewitt, CEO of McLaren Automotive, when sharing on the new models. “That achievement is widely acknowledged as one of the greatest endurance racing performances of all time, but for McLaren its importance was even greater because it demonstrated an immediate and undeniable connection between the racing DNA of our brand and the start of our road car journey.”

Based on the McLaren Senna GTR, which is McLaren’s fastest-lapping car outside of McLaren’s Formula 1 vehicles, the new GTR LM models have been given an upgraded powertrain producing 845PS and 800Nm from a recalibrated 4.0 liter twin-turbo V8 engine (offering 20PS more than the regular Senna GTR).

McLaren Senna GTR LM racing harness interior. Credit: McLaren Automotive
McLaren Senna GTR LM racing harness interior. Credit: McLaren Automotive

Each of the five special editions has received a unique hand-painted livery that pays tribute to its matching 1995 McLaren Le Mans car, along with bespoke features like the LM steering wheel with anodized gold gear shift paddles and control buttons, six-point fitted racing harnesses, gold-colored brake calipers and suspension wishbones and distinctive five-spoke OZ racing wheels reminiscent of the original F1 GTR.

“We wanted to make a major statement with this collection,’” explained Ansar Ali, Managing Director of McLaren Special Operations. “In creating these incredible cars to the requirements of some of our most discerning customers, we are showcasing the astonishing array of talent we have within MSO – a team that can visualise, design, produce and deliver products that really do take your breath away.

“The McLaren Senna GTR LM project has been a labour of love for nearly two years; we have gone to great lengths not only to perfect the engineering aspects of the cars, but also to gain co-operation from brand holders and partners to maximise authenticity.”

McLaren Senna GTR LM badging. Credit: McLaren Automotive
McLaren Senna GTR LM badging. Credit: McLaren Automotive

The Le Mans editions also feature a dedicated “1 of 1” nameplate with its VIN and the provenance details of its 1995 Le Mans F1 GTR “twin,” including the date of the race, the names of the three race drivers in that car, and the position in which they finished.

A bonus to owning one of the five limited editions is that each owner will be offered the opportunity to participate in a unique Le Mans circuit driving experience at the 2021 24 Hours of Le Mans event (originally scheduled for 2020 now rescheduled due to COVID-19 restrictions). Owners will be able to drive their own GTR LM’s around the circuit on the morning of the race accompanied by the original F1 GTRs that competed in 1995.

McLaren Senna GTR LM 825/1 “The Ueno Clinic Car”

A tribute to the McLaren F1/01R, the winner of the 1995 24 Hours of Le Mans and often referred to as “The Ueno Clinic Car.”

McLaren Senna GTR LM 825/1 "The Ueno Clinic Car" by MSO. Credit: McLaren Automotive
McLaren Senna GTR LM 825/1 “The Ueno Clinic Car” by MSO. Credit: McLaren Automotive

The charcoal grey livery with Ueno Clinic branding was relatively unknown at the time but was thrust into the limelight after their win. The McLaren Special Operations team has recreated the same 1995 livery and created a new paint tone, “Ueno Grey,” especially for it.

Other details of the original car have faithfully been recreated, including the cars unique driving lamps and the OZ Racing wheels.

Created with special paint tone "Ueno Grey"by MSO. Credit: McLaren Automotive
Created with special paint tone “Ueno Grey”by MSO. Credit: McLaren Automotive

The car bearing race number 59 was driven in 1995 by two-time Le Mans winner Yannick Dalmas, Japanese veteran Masanori Sekiya and former Formula One driver, JJ Lehto.

McLaren Senna GTR LM 825/6 “The Harrods Car”

A tribute to the McLaren F1/06R that finished 3rd in the 1995 24 Hours of Le Mans and often referred to as “The Harrods Car.”

McLaren Senna GTR LM "The Harrods Car" by MSO. Credit: McLaren Automotive
McLaren Senna GTR LM “The Harrods Car” by MSO. Credit: McLaren Automotive

The bright yellow livery with contrasting green stripe was courtesy of the partnership with the London department store Harrods. While a 2015 McLaren P1 GTR was also finished in the same livery style, this is the first time the Harrods logo has appeared on a McLaren in 25 years. To achieve the same finish, the McLaren Special Operations went with Solar Yellow for the body and Heritage Green for the stripe and matching pinstripe detailing.

Solar Yellow and Heritage Green with matching pinstripe. Credit: McLaren Automotive
Solar Yellow and Heritage Green with matching pinstripe. Credit: McLaren Automotive

Driven by British drivers Andy Wallace, Derek Bell, and Justin Bell, the 1995 Harrods Car (51) was a contender for 1st place when it suffered a transmission fault two hours from the flag that saw Wallace nurse the car across the finish line to place third.

Inspired by the 1995 F1 GTR "Harrods Car". Credit: McLaren Automotive
Inspired by the 1995 F1 GTR “Harrods Car”. Credit: McLaren Automotive
McLaren Senna GTR LM 825/2 “The Gulf Car”

A tribute to the McLaren F1/02R that finished 4th and is often referred to as “The Gulf Car.”

Mclaren Senna GTR LM 825 Gulf Car Front Side View
The McLaren Senna GTR LM “Gulf Car”. Credit: McLaren Automotive

Driven by Brazilian Maurizio Sandro Sala and Brits Mark Blundell and Ray Bellm, Car 24 McLaren F1 GTR completed 291 rain-lashed laps at the 24 Hours of Le Mans in 1995, eventually finishing in fourth place.

Reimagined by the McLaren Special Operations team. Credit: McLaren Automotive
Reimagined by the McLaren Special Operations team. Credit: McLaren Automotive

For this design, the McLaren Special Operations team has reimagined the 1995 Gulf Racing livery and used Gulf 95 Blue and Gulf 95 Orange with pinstripes to create a modern take on the original.

Oz Racing wheels have been used to finish the look in vivid orange and sills and roof strip in Gulf 95 silver and the Gulf Oil logo on the bonnet and doors.

Gulf Racing livery with Gulf 95 Blue and Gulf 95 Orange. Credit: McLaren Automotive
Gulf Racing livery with Gulf 95 Blue and Gulf 95 Orange. Credit: McLaren Automotive

Aryton Senna’s signature has also been emblazoned on the rear quarter of the bodywork.

Mclaren Senna GTR LM 825 Gulf Car Wheels
Five spoke OZ Racing wheels in Gulf 95 Orange. Credit: McLaren Automotive
McLaren Senna GTR LM 825/7 “The Jacadi Car”

A tribute to the McLaren F1/07R (Car 50) that finished in 5th place and often referred to as “The Jacadi Car.”

McLaren Senna GTR LM "The Jacadi Car" by MSO. Credit: McLaren Automotive
McLaren Senna GTR LM “The Jacadi Car” by MSO. Credit: McLaren Automotive

Driven by French-based customer team Giroix Racing (French drivers Fabien Giroix and Olivier Grouillard) and Swiss pilot Jean-Denis Deletraz, Car 50 was only a lap behind the “Gulf Car” in the 1995 24 Hours of Le Mans when it finished 5th.

French themed livery in Le Mans Blue. Credit: McLaren Automotive
French themed livery in Le Mans Blue. Credit: McLaren Automotive

The McLaren Special Operations team has reimagined the original royal blue livery on the McLaren Senna GTR LM. The proudly French-themed livery sees a bright “Le Mans Blue” for the body while a metallic blue known as “Polaris” has been used for the complementing details along with authentic Elf logos of the French oil company.

Complete with authentic Elf logos. Credit: McLaren Automotive
Complete with authentic Elf logos. Credit: McLaren Automotive
McLaren Senna GTR LM 825/5 “The Cesar Car”

A tribute to the McLaren F1/05R (Car 42) that finished 13th and is often referred to as “The Cesar Car.”

McLaren Senna GTR LM "The Cesar Car". Credit: McLaren Automotive
McLaren Senna GTR LM “The Cesar Car”. Credit: McLaren Automotive

The matching McLaren Senna GTR LM has been given a modern reinterpretation of the livery and has been given design details like the pole position lap times, contemporary race trophies, and Le Mans branding cues.

Mclaren Senna GTR LM 825 Cesar Car Side View
Original livery by Cesar Baldaccini. Credit: McLaren Automotive

Run by French team Société BBA, Car 42 was driven by an all-French line-up of Jean-Luc Maury-Laribiere, Marc Sourd, and Hervé Poulin at the 1995 24 Hours of Le Mans. Maury-Laribiere and Poulin were pioneers of ‘art cars’ and asked renowned artist Cesar Baldaccini to envisage a livery for the F1 GTR they would be racing at Le Mans.

An experienced endurance racer, Poulin’s fine collection of racing trophies became the inspiration for Cesar’s work on the McLaren.

Reimagined by the McLaren Special Operations. Credit: McLaren Automotive
Reimagined by the McLaren Special Operations. Credit: McLaren Automotive

All five limited editions have now been completed and will be delivered to owners in the United States, Europe, and the UK.

As with all bespoke commissions created by McLaren Special Operations, their value remains undisclosed unless the owners choose to share this detail.

Continue Reading

Luxury Cars

Bentley Continental GT Mulliner Is Latest Design Created by the Mulliner Team

Published

on

The new Bentley Continental GT Mulliner is the latest addition to the “Collections Portfolio” and the most luxurious Continental GT to date.
The new Bentley Continental GT Mulliner. Credit: Bentley Motors
The new Bentley Continental GT Mulliner. Credit: Bentley Motors

Earlier this year, Bentley’s Mulliner design team gave the Continental GT Convertible special bespoke treatment, and now they’ve turned their attention to the coupe version and created the Bentley Continental GT Mulliner.

Designed by Bentley's bespoke Mulliner design team
Designed by Bentley’s bespoke Mulliner design team. Credit: Bentley Motors

The latest addition to the bespoke “Collections portfolio,” the new Bentley Continental GT Mulliner features the “Double Diamond” matrix grille seen only on Mulliner versions along with matching Mulliner front fender vents, Mulliner stitching and detailing throughout the interior, and Mulliner Welcome Lamps beneath the doors.

The Continental GT Mulliner has also been given a new painted and polished Mulliner 22” wheel design and features Bentley’s iconic self-leveling “B” badges at the center.

New Mulliner 22" wheel design.
New Mulliner 22″ wheel design. Credit: Bentley Motors

The Mulliner Driving Specification has also been fitted as standard, with the interior cabin featuring Mulliner details throughout like the “Diamond in Diamond” quilting on the seats, doors trims, and rear quarter panels created with 712 individual stitches per diamond and 400,000 stitches across the entire cabin. A unique color split along with eight different three-color combinations by Mulliner is also offered to owners.

Bentley Continental GT Mulliner Interior Seating
The Mulliner Driving Specification comes as standard. Credit: Bentley Motors
Bentley Continental GT Mulliner Diamond Quilting
Iconic “diamond in diamond” Mulliner stitching option. Credit: Bentley Motors

Meanwhile, the seats are finished with embroidered Mulliner logos, and the floor mats are edged with micro-piping to match the rest of the interior theme.

The center console has also been dressed in a new diamond milled technical finish that uses precision machining to form a perfect pattern of facets, flanked either side by Grand Black walnut veneer with chrome overlays.

Center console with new diamond milled finish. Credit: Bentley Motors
Center console with new diamond milled finish. Credit: Bentley Motors

A Breitling clock makes an appearance sitting at the center of the console. Simultaneously, the passenger side fascia is finished with a silhouette of the car’s exterior profile and the Mulliner logo. The veneer flows into the doors, completed by a discreet Bentley ‘B’ motif.

Mulliner stitching on the interior seats is standard. Credit: Bentley Motors
Mulliner stitching on the interior seats is standard. Credit: Bentley Motors

If all of the extra Mulliner details are not enough, further personalization is available with 88 different colorized veneer finishes that can be matched to the interior or exterior of the car.

The Bentley Continental GT Mulliner is available in either Bentley’s iconic 6.0-liter W12 powertrain delivering 635 PS (626 bhp) or the smaller but just as agile 4.0-liter V8 offering 550 PS (542 bhp).

Bentley Continental GT Mulliner Dashboard
Bentley Continental GT Mulliner dashboard detailing. Credit: Bentley Motors

Orders for both coupe and convertible versions of the Bentley Continental GT Mulliner will be taken from October 2020, with first deliveries early next year.

Front fender vents with Mulliner double diamond design. Credit: Bentley Motors
Front fender vents with Mulliner double diamond design. Credit: Bentley Motors

As an added extra, the new Continental GT Mulliner customers will receive the keys to their car in a bespoke, Mulliner-branded, and handcrafted presentation box containing individual leather pouches matching the three-color interior configuration of their vehicle.

Continue Reading

Luxury Cars

ARES Design S1 Project – Their First Wholly Designed Supercar

Published

on

ARES Design releases pictures of a full-scale S1 Project, their low-profiled supercar, and the first to have been wholly designed by the Italian team.
ARES Design S1 Project Supercar
ARES Design S1 Project Supercar. Credit: ARES Design
  • Initial photos reveal ARES Design’s hypercar-inspired design
  • S1 Project full scale model to be presented at Salon Privé September 2020
  • Limited edition of 24 units
  • Production starts from January 2021

Since its incorporation in 2014, many automotive adaptations and creations have left the 23,000 square meter ARES Design factory in Modena, Italy. Creating one-off automotive works of art utilizing the world’s finest materials, leading CAD designers, electrical system engineering specialists, drivetrain assemblies, paint shops, artisan leather works, and metal coachbuilders have all worked tirelessly to make their client’s dreams come true.

ARES Design S1 Project Supercar side view
The ARES Design S1 Project will be built in Modena, Italy. Credit: ARES Design

Waleed Al Ghafari, ARES Executive Chairman and Co-Founder states, “ARES takes icons of automotive design and develops them further. We make perfect cars even better. We take them beyond, like nothing that has been seen before.”

One project that is especially close to the ARES Design team’s heart has been the S1 Project, because unlike other projects this supercar has been completely designed by ARES from the ground up. Originally conceived from a simple brief from the ARES product team, the S1 Project was tasked to be a hypercar design, with supercar performance and a sports car price tag.

ARES Design S1 Project Supercar front wheel detail
Double wishbone suspension, forged aluminium axles and adaptive Magnetic Ride Control. Credit: ARES Design

The result is a mesmerizing exterior created by ARES‘s Centro Stile which utilized extensive Computational Fluid Dynamics research to ensure ultimate aerodynamic performance and stability.

Created from hand-crafted carbon fiber body panels, the car’s dramatic low-profile silhouette, curvaceous wheel arches, low front splitter, and forward-sitting cockpit give the car an aggressive but flowing stance while producing maximum downforce and minimum aerodynamic resistance.

Its sleek design and performance are enhanced by its dynamic rear spoiler and the eye-catching exhaust exiting the rear bonnet – leaving the supercar’s back extractor area free and clean.

ARES Design S1 Project Supercar rear view
The twin exhausts exit the S1 Project’s rear bonnet. Credit: ARES Design

The heart of the ARES S1 Project is powered by a naturally aspirated V8 powerplant with a maximum 8,800rpm. The S1 Project’s anticipated acceleration is expected to produce a 0-62mph (0 -100km/h) time of 2.7 seconds along with a deeply satisfying sonorous roar from the high-revving engine. In addition, the rear-wheel drive supercar has an 8-speed dual-clutch transmission, an ARES Design-tuned ECU, and a bespoke crafted exhaust system giving the car a maximum power of 522kw (715hp).

Underneath all this power the Ares S1 Project is underpinned by double wishbone suspension, forged aluminium axles and adaptive Magnetic Ride Control.

ARES Design S1 Project Supercar rear side view
The rear wheel drive car is powered by a naturally aspirated V8. Credit: ARES Design

Inside, the supercar interior reveals the use of minimal and elegant lines, creating a 3D effect enveloping both driver and passenger, with the car’s Human-Machine-Interface contained within the central console and dashboard. Styling and materials will be the task of ARES Design’s artisanal craftsmen, finishing the forward-sitting cockpit using Alcantara, Napa leather, and carbon fiber and aluminum panels to round out the S1 Project’s ambiance.

ARES Design S1 Project Supercar interior seats
The ARES S1 Project Interior features Alcantara and Napa leather. Credit: ARES Design
ARES Design S1 Project Supercar interior dashboard instruments
Carbon fibre and aluminium panels round out the S1 Project’s interior styling. Credit: ARES Design

Dany Bahar, ARES Co-Founder, commented: “We are delighted to announce this car, as it marks a new chapter for ARES as it is the first car wholly designed by our team at ARES. We did extensive research with our clients and potential clients to find out what they really wanted in a supercar and, time and again, it came back to them wanting to enjoy driving a car; to have fun and not to be worried about power that supercars have. So, we set about achieving that. The aim was not to produce the fastest, the lightest or the most technologically advanced supercar; we want to produce a car that our clients want, that is simple and fun to drive and looks simply stunning and with the S1 Project I know we will have achieved just that.”

Just twenty-four S1 Project coupés will be built to order, with production commencing January 2021.

ARES Design S1 Project Supercar front view
ARES have produced a car their clients want. Credit: ARES Design
ARES Design S1 Project Supercar headlight detail
Only 24 examples of the ARES Design S1 Project car will be made. Credit: ARES Design

For those wanting to behold the ARES S1’s dimensions in person, ARES Design is displaying the full-scale model between the 23rd and 26th of September at the 2020 Salon Privé Salon Concours d’Elégance Blenheim Palace for the UK debut.

ARES will also be displaying four hand-built vehicles; its Bentley Mulsanne Coupé, joined by the Panther ProgettoUno (the first model from its Legends Reborn programme, which blends the design of iconic classics with state-of-the-art technology), along with a pair of ARES two-wheelers – the Café Racer and Scrambler.

ARES Design S1 Project Supercar front side view
See the ARES S1 Project model in person at the 2020 Salon Privé, 23-26 September. Credit: ARES Design

Continue Reading
Advertisement
Advertisement
Advertisement

Trending